AGS 1 For use on hard, non-porous surfaces and painted surfaces.
AGS 1 is a powerful graffiti and paint remover. For use on exterior and interior surfaces. For use on hard, non-porous surfaces and painted surfaces. Readily biodegradable.
INSTRUCTIONS FOR USE
Apply AGS 1 on to a dry, clean rag or an absorbent paper towel and wipe away the graffiti. Turn over the cloth so that only the clean part is used to the graffiti. Avoid wiping over dissolved graffiti. If there is a grease build up then wipe it off with clean rag. In order to stop the dissolution process, simply apply water on the surface already covered with the graffiti. It is always recommended to make a test on a small part of the surface.
Apply AGS 1 with a low pressure sprayer. Let dwell for 5-10 minutes. Jet off with hot water and high pressure, (90°C, 150 bar/2175 PSI). Lance nozzle spread should be 15 – 25 degrees and water flow should be 15 to 20 litres/minute, (4-5 gal/minute). If pigment shadows remain, use AGS 60 or AGS 65.
Use as concentrate.
Store frost-free in original closed container.
Approximately 24 months in unopened container.
Use protective gloves, clothing and glasses.
- Yellowish liquid.
- Packaging: 5 or 25 litre plastic jerricans.
- Densitet: 1,09 kg/liter.
- Mild odour.
- Flash point 99°C
- Contains: 1-butylpyrrolidin-2-one, gamma-butyrolactone.
Harmful if swallowed. Causes skin irritation. Causes serious eye irritation.
Not classified as dangerous goods according to ADR.
For more information, see MSDS.