AGS 221 GEL For painted surfaces

Article number: 3625

AGS 221 GEL is used for graffiti and paint removal from smooth factory made/painted surfaces, e.g trains, coaches & buses, cars and industrial buildings etc. Can also be used on porous substrates. AGS 221 GEL is readily biodegradable.


Application instructions

Graffiti-removal from smooth surfaces:
Apply a thick layer of AGS 221 GEL with a brush. Cover all graffiti and wait 3-5 minutes. Agitate the whole area with a brush. When the graffiti has dissolved, jet off with medium-pressure and preferably warm water. If required, repeat the process.

Graffiti-removal from porous surfaces
Apply AGS 221 GEL with airless sprayer or brush. Agitate the whole area with a brush. Leave area to dissolve all graffiti approximately ½ – 4 hours. Jet off with hot water and high pressure, (90°C, 150 bar/2175 PSI). Lance nozzle spread should be 15 – 25 degrees and water flow should be 15 to 20 ltrs/minute, (4-5 gal/minute).

Note! For metal surfaces do not use too much pressure, as the effect can be negative. Instead, wipe with a sponge or cloth and rinse with warm water.

Use as concentrate.

0,3 – 1,0 litre/m².

Store at room temperature in original closed container.

Shelf life
Approximately 24 months in unopened container.

Gloves. Safety glasses in case of splashes.


Technical data

  • Viscous yellowish fluid. The colour may vary.
  • Packaging: 5 litre plastic jerricans or 20 litre plastic buckets.
  • Density: 1.05 kg/litre.
  • Faint solvent odour.
  • Contains 2-butoxyethanol, dimethyl succinate.

Not classified

Not classified as dangerous goods according to ADR.
For more information, see MSDS.

Contact us