AGS 3+ GEL For porous surfaces
AGS 3+ GEL is a thickened highly effective graffiti remover to be used on both porous and hard surfaces. AGS 3+ GEL dissolves spray-paint graffiti, permanent markers and even petroleum based rust protective sealers. For use on exterior and interior surfaces. Readily biodegradable.
AGS 3+ GEL may be used on following surfaces:
Concrete, brick, granite, marble, limestone, sandstone, slate, surfaces painted with non-organic paint.
Metal, treated wood, clinker, glazed brick, glass.
Apply AGS 3+ GEL with a brush or airless sprayer. Agitate the surface well. Leave until graffiti has dissolved, 20 minutes – 4 hours. When cold, the time increases. Jet off with hot water and high pressure, (90°C, 150 bar/2175 PSI). Lance nozzle spread should be 15 – 25 degrees and water flow should be 15 to 20 litres/minute, (4-5 gal/minute). If pigment shadows remain, use AGS 60 or AGS 65. Note! For metal surfaces do not use to high pressure. Instead wipe with sponge or cloth and rinse with warm water.
Use as concentrate.
0,5 – 1,0 ltr/m².
Store frost-free in original closed container.
Approximately 24 months in unopened container.
Use protective clothing, gloves and safety glasses. Use breathing mask in poorly ventilated areas.
- Viscous bluish fluid.
- Packaging: 5 or 25 litre plastic jerricans.
- Density: 0,98 kg/litre.
- Mild odour.
- Contains dimethyl succinate, gamma-butyrolactone, 2-butoxyethanol, benzyl alcohol.
Harmful if swallowed. Causes skin irritation. Causes serious eye irritation. Harmful if inhaled.
Not classified as dangerous goods according to ADR.
For more information, see MSDS.