AGS 33+ GEL For porous surfaces - Cold weather
AGS 33+ GEL is a thickened highly effective graffiti remover to be used on porous and some hard surfaces. Specially designed for use in cold weather conditions. AGS 33+ GEL dissolves spray-paint graffiti, permanent markers and even petroleum based rust protective sealers. AGS 33+ GEL may be used on following surfaces:
Concrete, brick, granite, marble, limestone, sandstone, slate, surfaces painted with non-organic paint.
Metal, treated wood, clinker, glazed brick and some plasters.
Apply AGS 33+ GEL with a brush or airless sprayer. Agitate the surface well. Leave until graffiti has dissolved, 20 minutes – 4 hours. Jet off with hot water and high pressure, (90°C, 150 bar/2175 PSI). Lance nozzle spread should be 15 – 25 degrees and water flow should be 15 to 20 litres/minute, (4-5 gal/minute).
Use as concentrate.
0,5 – 1,0 litre/m².
Store frost-free in original closed container.
Approximately 24 months in unopened container.
Protective clothing. Visor when high-pressure washing and breathing mask in poorly ventilated areas.
- Viscous yellowish fluid.
- Packaging: 5 or 25 litre plastic jerricans.
- Density: 1,02 kg/litre.
- Solvent odour.
- Flash point >58°C
- Contains n-butylpyrrolidone, y-butyrolactone,dimethyl succinate, hydrocarbons, C9, aromatic.
Flammable liquid and vapour. May be fatal if swallowed and enters airways. Causes skin irritation. Causes serious eye irritation. May cause drowsiness or dizziness. Harmful to aquatic life with long lasting effects.
Classified as dangerous goods according to ADR.
UN 3295, HYDROCARBONS, LIQUID, N.O.S.
Class: 3 PG: III
For more information, see MSDS.