AGS 5 SR GEL For ink and leather dye- graffiti

Article number: 3628

AGS 5 SR GEL a specially developed graffiti remover for removal of shadowing from most types of permanent markers or felt-tip pen graffiti and leather dyes. Can also be used on spray-paint. AGS 5 SR GEL may be used on most surfaces. Hard non-porous surfaces, such as painted substrates. Porous surfaces, such as brick, concrete, sandstone, limestone, etc. AGS 5 SR GEL has shown to be very effective to solve difficult leather dye pigments. For use on exterior and interior surfaces.

Instructions


Application instructions

Hard surfaces:
Use AGS 5 SR GEL when the graffiti is difficult or need prolonged dwelling time. Apply with a brush, let work. Wipe off with a clean rag. To avoid chemicals on the surface, neutralise with water or a mild alkaline cleaner. It is always recommended to make a test on a small part of the surface.

Porous surfaces:
Apply AGS 5 SR GEL with a brush or airless sprayer. Agitate the surface well. Leave until graffiti has dissolved, 20 minutes – 4 hours. When cold, the time increases. Jet off with hot water and high pressure, (90°C, 150 bar/2175 PSI). Lance nozzle spread should be 15 – 25 degrees and water flow should be 15 to 20 litres/minute, (4-5 gal/minute). If pigment shadows remain, use AGS 60 or AGS 65.

Dosage
Use as concentrate.

Consumption
0,2 – 0,5 litre/m².

Storage
Store frost-free in closed original container.

Shelf life
Approximately 24 months in unopened container.

Precautions
Use protective clothing, glasses and gloves.

Documents


Technical data


  • Brownish thickened liquid.
  • Packaging: 5 litre plastic jerricans.
  • Density: 0,97 kg/litre.
  • Solvent odour.
  • Contains n-butylpyrrolidone, 2-(2-buthoxyethoxy) ethanol, 2-buthoxyethanol, potassium hydroxide.

Marking
Warning

Harmful if swallowed. Causes skin irritation. Causes serious eye irritation.

Not classified as dangerous goods according to ADR.
For more information, see MSDS.

Contact us