AGS 5 SR For ink and leather dye- graffiti
AGS 5 SR is a specially developed graffiti remover for removal of shadowing from most types of permanent markers or felt-tip pen graffiti and leather dyes. Can also be used on spray-paint. AGS 5 SR may be used on most surfaces. Hard non-porous surfaces, such as painted substrates. Porous surfaces, such as concrete, brick, sandstone, limestone, etc. AGS 5 SR has shown to be very effective to solve difficult leather dye pigments. For use on exterior and interior surfaces.
Instructions
Application instructions
Apply AGS 5 SR on to a dry, clean rag or an absorbent paper towel and wipe away the graffiti. Turn over the cloth so that only the clean part is used to the graffiti. Avoid wiping over dissolved graffiti. If there is a grease build up then wipe it off with clean rag. In order to stop the dissolution process, simply apply water on the surface already covered with the graffiti. If shadows remain use AGS 60 or AGS 65. It is always recommended to make a test on a small part of the surface.
Dosage
Use as concentrate.
Consumption
0,1-0,3 litre/m².
Storage
Store frost-free in closed original container.
Shelf life
Approximately 24 months in unopened container.
Precautions
Use protective clothing, glasses and gloves.
Documents
Technical data
- Brownish liquid.
- Packaging: 5 litre plastic jerricans.
- Density: 0,97 kg/litre.
- Solvent odour.
- Contains n-butylpyrrolidone, 2-(2-buthoxyethoxy) ethanol, 2-buthoxyethanol, potassium hydroxide.
Marking
Warning
Harmful if swallowed. Causes skin irritation. Causes serious eye irritation.
Not classified as dangerous goods according to ADR.
For more information, see MSDS.