AGS 65 Shadow remover

Article number: 3665

AGS 65 removes shadowing left in substrate following graffiti removal, in special cases also paint removal. AGS 65 is formulated for use on the following materials: granite, slate, sand-stone, glazed brick, treated marble, wood and non-organic paint. AGS 65 is slightly thickened to cling on surface and increase the dwelling time. Readily biodegradable. For use on exterior and interior surfaces. Primarily used on porous surfaces.

NOTE! AGS 65 must not be used on soft metal surfaces, aluminium, e.g.

Instructions


Application instructions

Apply AGS 65 by brush on wet surface, leave to dwell for 5 – 30 minutes until graffiti/shadowing has dissolved. Jet off with high-pressure hot water, (40-90°C, 70-150 bar/1015-2175 PSI). Adjust pressure to suit surface condition.

Note! For metal surfaces, the effectiveness can be reduced if too high pressure is used. A better result can be achieved if the surface is wiped with a sponge or cloth in the rinsing process. Repeat the procedure if required.

Dosage
Use concentrate.

Consumption
0,2 – 0,5 litre/m² per application using concentrate.

Storage
Store frost-free in closed original container.

Shelf life
Approximately 24 months in unopened container.

Precautions
Special caution must be taken, as AGS 65 is a CORROSIVE product. Use protective clothing, visor, glasses and gloves. If product comes in contact with eyes, rinse with lot of water and immediately go to hospital. If skin contact, rinse with lots of water, to hospital if necessary.

Documents


Technical data


  • Brownish slightly viscous fluid.
  • Packaging: 5 or 25 litre plastic jerricans.
  • Density: 1,09 kg/litre.
  • pH-value approx. 14.
  • Contains potassium hydroxide, 2-butoxyethanol, 2-aminoethanol.

Marking
Danger

Causes severe skin burns and eye damage.

Classified as dangerous goods at road and sea transport.
UN 1814, POTASSIUM HYDROXIDE SOLUTION
Class: 8 PG: II
For more information, see MSDS.

Contact us