AGS 2+ GEL For porous surfaces

Article number: 3640

AGS 2+ GEL is a powerful graffiti and paint remover. For use on exterior and interior surfaces. AGS 2+ GEL may be used on porous surfaces for all weather conditions. AGS 2+ GEL effectively dissolves spray paint graffiti and permanent markers. Readily biodegradable according to OECD test 302 B.

AGS 2+ GEL may be used on following surfaces:
Porous surfaces
Concrete, brick, granite, marble, limestone, sandstone, slate, surfaces painted with non-organic paint.

Hard surfaces
Metal, treated wood, clinker, glazed brick, glass.

Instructions


Application instructions

Apply AGS 2+ GEL with a brush or airless sprayer. Agitate the surface well. Leave until graffiti has dissolved, 20 minutes – 4 hours. When cold, the time increases. Jet off with hot water and high pressure, (90°C, 150 bar/2175 PSI). Lance nozzle spread should be 15 – 25 degrees and water flow should be 15 to 20 litres/minute, (4-5 gal/minute). If pigment shadows remain, use AGS 60 or AGS 65.

Note! For metal surfaces do not use to high pressure. Instead wipe with sponge or cloth and rinse with warm water.

Dosage
Use as concentrate.

Consumption
0,5 – 1,0 ltr/m².

Storage
Store frost-free in original closed container.

Shelf life
Approximately 24 months in unopened container.

Precautions
Protective clothing. Visor when high pressure washing and breathing mask in poorly ventilated areas.

Documents


Technical data


  • Viscous yellowish fluid.
  • Packaging: 5 or 25 litre plastic jerricans.
  • Density: 1,09 kg/ltr.
  • Mild odour.
  • Flash point >90°C
  • Contains n-butylpyrrolidone, gamma-butyrolactone, dimethyl succinate.

Marking
Warning

Harmful if swallowed. Causes skin irritation. Causes serious eye irritation.

Not classified as dangerous goods according to ADR.
For more information, see MSDS.

Contact us