AGS POWER BLUE LIQUID Combined graffiti and shadow remover

Article number: 3800

AGS POWER BLUE LIQUID is a very powerful graffiti remover to be used on porous surfaces such as: granite, brick, concrete, lime, tiles, etc. AGS POWER BLUE LIQUID dissolves spray-paint graffiti, permanent markers and leather dye graffiti.

NB! Do not use AGS POWER BLUE LIQUID on metal surfaces as aluminium. Make a test before removal.


Application instructions

Apply AGS POWER BLUE LIQUID with a brush. Agitate the surface well. Leave until graffiti has dissolved, 10-30 minutes depending on the surface, graffiti and weather conditions. Jet off with hot water and high pressure, 90°C, 150 bar/2175 PSI or adjust to the surface. Lance nozzle spread should be 15 – 25 degrees and water flow should be 15 to 20 litres/minute, (4-5 gal/minute). In case of shadows, apply AGS POWER BLUE LIQUID as a shadow remover, wait for 5-10 minutes before jet off with high pressure. Final rinsing with low pressure.

Use as concentrate.

0,5 – 1,0 litre/m².

Store frost-free in original closed container.

Shelf life
Approximately 24 months in unopened container.

AGS POWER BLUE LIQUID is CORROSIVE, wear suitable protective clothing, gloves and eye/face protection. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.


Technical data

  • Light viscous dark brown fluid.
  • Packaging: 5 or 25 litre plastic jerricans.
  • Density: 0.99 kg/litre.
  • Solvent odour.
  • Flash point 46°C.
  • pH value 14.
  • Contains Potassium hydroxide, n-Butylpyrrolidone , 2-ButoxyethanolHydrocarbons, C9, aromatic, ethanol.


Flammable liquid and vapour. Harmful if swallowed. Causes severe skin burns and eye damage. Harmful to aquatic life with long lasting effects.

Classified as dangerous goods at road and sea transport.
Class: 8 PG: II
For more information, see MSDS.

Contact us